Introduction Ceramic Rotary Vibrating Sieve Particle Rotary Vibrating Screen Pharmaceutical Vibration Sieve is suitable for sieving and filtering grain, powder and mucus material. The vibration source of rotary vibration sieve is vertical motor, the motor is installed with upper and lower eccentric weight at both ends,changing the motor rotary motion into horizontal, vertical, and inclined motions,hence the movement is transferred to the screen surface. It is featured by its low noise, high efficiency, fast network required for 3-5 minutes, fully enclosed structure,Rotary Vibrating Sieve is widely used in many industries, covering food, chemical, ceramic, metallurgy, pollution treatment and so on, dealing with various kinds of materials.
Advantages and Features 1. Various material separation range- power or particle,wet or dry, heavy or light,coarse or fine, hot or cold. 2. Various size range-available diameter from 400mm to 2000mm,mesh size can reach 500 mesh ( 0.028 mm). 3. Environmentally Friendly- Fully enclosed structure,no dust pollution,improve working conditions for operators as well. 4. Quick Screen Changes-Quick release device is provided to replace the screen with 5 minutes. 5. Automatic screen cleaning-bouncing balls keep screen openings clean and maintain a good efficiency. 6. Wide application-Rotary vibrating screen is applicable to any powder, granule, particle and mucus.
Screen Surface Area(m3)
Feeding size (mm)
NO. of Layers
Note: the parameter above is just for reference,it can be customized by different requirment.
♦Material to be processed: _____
♦Max. granule size of the feeding material: _____mm
♦Handling capacity (Ps. It means the total
♦Layer number: ______
material capacity feeding from the inlet): _____t/h
♦Mesh size of each layer: _____mm
♦Bulk Density: _____t/m3
♦Particle distribution percentage:____________
♦Material temperature: _____ºC;
(please check the following example to help you
understand it.Supposing the layer number is 2
♦Material is corrosive or not: ____ (Ps. Yes or No)
and the aperture size of each layer is 10mm and 5mm,
♦Material is sticky or not: ____ (Ps. Yes or No)
then you will get 3 kinds of products: X,Y and Z.
♦Working environment is indoor or outdoor: _____
X≥10mm; 5mm≤ Y < 10mm; Z<5mm.
♦Working environment temperature: ______ ºC
We want to confirm the following information:
♦Upstream equipment (Ps. It means what kind of
1)The percentage of X in the whole material:_____%;
equipment is used to feed the material): _____
2)The percentage of Y in the whole material:_____%;
♦Downstream equipment (Ps. It means what kind of
3)The percentage of Z in the whole material:_____%;)
equipment is used to discharge the material): _____